FLASH HARRY RUST STOP

A water based Rust preventing Acrylic primer, that offers long term corrosion protection on all iron and steel surfaces.

If applying to new untreated galvanized iron, the surface should be treated with an acid degreasing primer until a water break-free surface is attained and allow to dry.

Rusted surfaces should be wire brushed down removing all loose material until a bright steel finish is obtained.

Do not apply if rain is imminent.

Do not apply in temperatures less than 10c or more than 40c, so do not apply early mornings or late afternoons.

Overcoating time @ 25c, a minimum of 4 hours for water-based coatings and 48 hours for solvent based coatings.

Drying time depends on humidity, air temperature as well as film thickness Coverage 7 – 8m2 per Litre per coat. For best results always apply two coats (2-3 hours between coats)

Clean up - with water.